XLC900 Composite Shaft Classic Series $399-$410

XLC900 SERIES  (XLC920  $399 – XLC930 $399 – XLC910 $410)

The new XLC Elite roller skis are the best of everything we have learned from 30 years of building roller skis.

The XLC are the lightest and the most snow like solid rubber wheel roller skis we have ever produced. The vibration damping of the new composite frame is exceptional, and, coupled with the shock absorbing wheel forks, the XLC makes skiing on pavement as similar to skiing on snow as possible. In addition to lower ski weight and the improved vibration damping, another advantage of the XLC is a lower center of gravity. The clearance from the pavement to the bottom of the shaft is the same, but with the strong construction we can make the shaft thinner, so the top of the shaft is lower, making the skis more stable. Safety is high priority at Jenex, so all XLC models are available with our patented brakes and speed reducers. For skiers weighing over 88 Kg (195 pounds), we offer the XLC in a Heavy Duty (HD) version that is about 25% stiffer.

COMPOSITE FIBERS: Over the last twenty years we have tested most high strength synthetic fibers, including the many variants of Carbon, S glass, E glass and Aramid. All of these fibers have strengths and weaknesses. Aramid (Kevlar^TM) fibers have high tensile strength, dampen vibration and re extremely abrasion resistant, but are very weak in compression. Carbon is extremely stiff and strong in both tension and compression, but breaks very easily from impact, which is why so many Carbon ski poles break in sprint and mass start races. Carbon is a great material, but to prevent impact failure Carbon fiber shafts need a core with good energy absorbing properties and perform best when combined with more impact resistant fibers. And that’s what we have with the XLC.

THE CORE: The core material is the foundation of a roller ski shaft and we have tried about every material available including a variety of metal cores. We have used organic cores like Baltic birch, Italian poplar, Balsa and many synthetic cellular cores. We now know from extensive experience that for roller skis, cellular cores are superior to metal cores. The XLC uses the best core we have tested to date. However, fabricating the cellular core is time consuming and expensive compared to an extruded core.

BONDING: Composite structures need a very strong bond to both the fibers and the core. Bonding high strength fibers to a metal core can be more difficult than bonding to a porous cellular core. The metal must be aggressively etched for the fibers to bond properly. The cellular core we use has thousands of microscopic pores per square centimeter, and therefore the epoxy penetrates and bonds extremely well the core. The epoxy that binds the fibers to themselves and to the core has a tensile strength about 3X greater than conventional epoxies and is the strongest commercially available.

The wheel forks have much better fenders than the original 800 and 900 series skis.  The combination fork and fenders are produced in Du Pont’s™ toughest thermoplastic, further strengthened with the addition of carbon fibers during the injection molding process. The non-metallic wheel forks reduce vibration, and for improved safety, all V2 Roller Skis are designed to accept the patented Jenex speed reducers and brakes.

The XLC900 is available in 3 speeds.  XLC930 is fast, XLC920 is medium and XLC910 is slow.  The XLC910 are very close to snow speed. Roller ski study in Sweden. The 920 are medium slow and the 930 are medium speed. The rolling resistance in the 910 free wheels is increased using our patented ISR (internal speed reducer) that weighs only 10 grams. The wheel forks with the built in fenders use the same strong Du Pont™ composite material that we have employed on the V2-900 series for many years

WEIGHT LIMIT 195lb (88kg)

Available with Heavy duty Shafts for skiers 196-220lb (89-100kg)

Specifications:

Weight / pair: 1725 grams  (3lb 13oz)

Wheelbase: 708 mm. ( 27.9 “)

Wheel Dimensions: 70mm diameter X 41mm wide (2.75 in x 1.6”)

Rubber composition: Highly abrasion resistant rubber with a durometer of 72 shore A.

Bolts: 6x1x55 aluminum and   6x1x65mm grade 12-9 zinc-plated steel bolts.

Optional Speed Reducer: ATRQ900

Optional Brake: BXLQ900

Replacement wheels:    Front: RW9 ratchet wheel

Rear- Free wheels:  W10 – slow    W20 – med      W30 -med-fast

Our V2 ROLLER SKI GLOVES offer excellent protection!

Instructions